Anda Masterbatch( Group) Co., Limited
Model No.: 6030
Unregular Black Pellets: 2-4mm
Packaging: 25kg per Coating Paper Bag
Place of Origin: China
Supply Ability: 800ton/Month
Filler Black Masterbatch --25% Carbon Black Model: 6030
Filler Black Masterbatch--25% Carbon Black 6030 is the highest Carbon Black Masterbatch made by single screw extruder, because single screw extruder can not make sure the dispersion for high concentration. The Filler Black Masterbatch is made with carbon black content--25% and 30% calcium carbonate filler and recycle PE carrier. It possesses the advantage on the price comparing with the same carbon content. the 25% CB Filler Black Masterbatch MFI is low, about 6 gram per 10mintues under pressures 21.6kg and 190℃, so it is mostly applied as the filler black masterbatch with low requirements injection and extrusion, or material compounding, or used for very low quality blowing film. Its dosage could be as high as 3-10% as filler black masterbatch or compounding, . The 25% CB Filler Black Masterbatch cannot be used for high requirements production, because it could affect the final products performance and finish.
Carbon Black Content=25%±1%
Carbon Black =M8300
Calcium Carbonate= 600mesh
Black 6030 is compatialbe with LDPE,HDPE,LLDPE.
Method of Usage
Black 6030 is for direct addition and mixing with plastic resins in mixer, it completely avoids pollution and mal-scattering problems caused by pigment.
3-12% subjected to the final products requirements.
Density(24℃) : 1,600kg/m3
Melting Flow Index : 9g/10min(21.6kg/190℃)
Moisture Content : <0.2%
Black 6030 is supplied in pellet form packed in 25kg bags.It should be stored in a dry place.
Anda Masterbatch, Compounding Your Success!